Safesight SC3102 Instalační příručka Strana 15

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 15
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 14
SafesightSC0301‐SC3102Backupcamerasystem www.qualitymobilevideo.com
Page13
10.4 Monitor randomly turns on and off
Themonitorwillrandomlyturnonoroffiftheincorrectreversecircuitisused.Many
newervehicleshavelightbulbsthathavedualfilaments.Dualfilamentbulbstypicallyhave
athreewireconnection.
1. Useavoltmetertodeterminewhichwireisthecorrectonetotap.
2. Metermustread12voltswhenthevehicleisplacedintoreverse.Anyfluctuation
involtagelargerthan1voltgenerallymeansthattheincorrectwirehasbeen
tapped.
3. Tapthereversewireusinganinsulatedwiretap.
4. Thereverselightmaybecontrolledbyalightingmodule;inwhichcasearelay
wouldbeneeded.
10.5 Both camera and monitor are connected +12 volts but there
is still no picture
SincetheSC3102monitorhasanauto‐sensefeature,ifthereisnopictureonthemonitorit
couldbeduetoafaultyconnectiononthecameraendormonitorend.
1. Makesurethemonitoriscorrectlyconnectedtoa+12volts
2. Makesurethecameraisconnectedtoa+12volts
3. EnsuretheRCAextensioncableisconnectedcorrectlyonboththecameraand
monitorend.
4. Testthemonitorusingadifferentvideosourcetodetermineifthemonitoris
faulty
5. Testthecamerawithadifferentmonitortodetermineifthecameraisfaulty
Zobrazit stránku 14
1 2 ... 10 11 12 13 14 15

Komentáře k této Příručce

Žádné komentáře